redcine x

RED 苹果工作流程软件更新

RED 苹果工作流程软件更新 ,它是针对 red one 影视级别的摄像机在苹果平台下进行剪辑、调色的一个必要插件,方便在苹果电脑上进行专业化的后期编辑套底工作。

red apple workflow installer v5.0 更新如下:
主要更新内容:
Added: Support for DRAGONcolor2 and REDcolor4

REDCINE-X PRO BUILD 33 RELEASE – OS X BUILD 更新如下:
Added: Support for DRAGONcolor2 and REDcolor4.
Added: Support for YUV output to Blackmagic and AJA monitoring devices.
Note: Rocket-X support requires driver 2.1.19.0 and firmware 1.3.19.7 or higher.
Fixed: Monochrome half resolution premium GPU exports.
Fixed: OpenCL Dragon Monochrome full resolution top and right border.
Fixed: A.D.D. Snapshots weren’t applying A.D.D.
Fixed: QuickTime export with mono audio now work correctly in VLC and FCP7.
Fixed: Issue with audio drift on export when working with very large clips.
Fixed: CPU based horizontal flip was broken in some cases.
Fixed: Issue where an RMD would automatically be saved when loading an audio BWF file.
Fixed: Bins now always show the correct clip count.
Fixed: Fonts directory not being found on Windows when trying to do Burn In.
Fixed: Cycling through clips in the browser was sometimes broken.
Fixed: A clips rating and label is now correctly shown in the bin when loaded.

下载地址:点击下载red apple workflow     点击下载redcine-x pro

文章出自finalcolor.net,转载请注明出处,谢谢。

REDCINE-X Professional Build 31更新发布

REDCINE-X Professional Build 31 Release

Added: Dragon Enhanced Blacks (D.E.B) control.
Added: Metadata for interchangeable OLPF’s.
Added: Support for iXML timecode metadata for BWF audio auto-sync.
Added: Colors in the export tab status column to represent state: green for finished, yellow for processing, and red for abort/error.
Added: Additional columns in the export preset table to show format, resolution, framerate, and output folder for presets.
Added: Ability to select multiple presets in the preset table (to delete, move, or export).
Added: Keyboard shortcuts for Snapshot and R3D snapshot. Read More

RED APPLE WORKFLOW INSTALLER V4.1更新

这个插件是针对final cut pro x剪辑redone拍摄素材很重要的插件,请下载安装!

 

点击下载

 

更新内容如下:

  • Added: SCARLET-X DRAGON support.

  • Added: DRAGON MONOCHROME support.

  • Fixed: Issue where DRAGON and MONOCHROME clips could have an incorrect look applied.

Copyright © 2014 RED Digital Cinema, All Rights Reserved.

 

文章出自finalcolor.net,转载请注明出处,谢谢。

 

REDCINE-X pro 30.1.0更新

redcine-x pro是编辑red摄像机拍摄素材,重要的流程软件,进行初级调色和套底的必备软件!
更新如下:
Added: Scarlet-X Dragon support.
Added: Dragon Monochrome support.
Added: Rocket-X support for RED ONE has been enabled.
Added: OpenCL compatibility improvements when using the latest drivers for AMD FirePro and Radeon cards.
Added: Timeline hotkeys are now configurable.
Fixed: Regression where snapshots were not honoring crop settings correctly.
Fixed: Regression where BWF exports were not working correctly.
Fixed: Random crash when starting up REDCINE-X PRO on Windows.
Fixed: M button in video player was not working.
Fixed: Linear light output (outside of EXR) not always being linear.
Fixed: Bilinear scaling option in export preset settings.
Fixed: Issue with burn in and watermark font not being colored correctly.
Fixed: Issue with watermark fonts being cut off.
Fixed: Issue where Motion Mount metadata was shown for non-Motion Mount clips.
Fixed: Issue where high frame rate exports to QuickTime did not have the correct timecode.
Fixed: Issue where high frame rate timecode was parsed incorrectly with -S/-E options in REDline.
Fixed: Generate REDline script on Windows produced an empty file.
Fixed: Export would fail when exporting via REDline from within REDCINE-X.
Fixed: Crash when enabling SDI output when CUDA is enabled.

下载地址:点击下载

文章出自finalcolor.net,转载请注明出处,谢谢!

RED公司发布REDCINE-X专业工作流程软件更新

REDCINE-X PROFESSIONAL BUILD 30 苹果版本发布

redcine-x 30

此版本变化:

Updated: 新界面的变化.
Added: DRAGONcolor and REDgamma4.
Added: Advanced Dragon Debayer (A.D.D.) with HDRx and motion support.
Added: Support for camera generated markers.
Added: CUDA support.
Added: Ability to filter wav files from the browser.
Added: Rating can now be applied to both clips and frames through context sensitive keyboard shortcuts.
Added: Rating a frame now automatically creates a frame marker.
Updated: Default keyboard shortcuts for rating, video out and L/R stereo toggling have been changed.
Fixed: Improved OpenCL and Cuda card compatibility checks.
Fixed: Rotation in 3D side by side mode.
Fixed: Crash when doing still snapshots.
Fixed: Some fit height modes where incorrect when Rocket was enabled for decoding.
Fixed: OpenEXR is now properly supported when doing simple blend.

下载地址:点击此处下载

文章出自finalcolor.net,转载请注明出处,谢谢!

Red发布Redcine-X Pro和RED苹果工作流程插件更新

RED APPLE WORKFLOW INSTALLER V3.1更新:

下载地址:点击下载
For Intel-based Apple Macintosh systems running Final Cut Pro X, or Final Cut Pro 7 (part of Final Cut Studio), the RED Apple Workflow Installer v3.1 provides the RED FCP X plug-in (v1.4), RED QuickTime codec (v5.3), Log and Transfer plug-in for FCP (v30.4), and Color plug-in (v4.8) functionality to import REDCODE RAW clips as native REDCODE media (R3D’s), or wrapped in QuickTime, or the option to transcode them directly to Apple’s ProRes codec.

更新选项:
Added: Support for new Dragon OLPF.
Fixed: Issue where color camera could show up as Monochrome.

CHANGES FOR RED RAW FINAL CUT PRO X PLUGIN:
Fixed: A memory leak when using Rocket.
Fixed: Various crashes when using Rocket.
Fixed: Dropped frames in a clip could result in nothing being available after the first dropped frame.
red for fcpx
Screen Shot 2014-02-06 at 4.18.37 PM

REDCINE-X PROFESSIONAL BUILD 22.3 RELEASE – OSX BUILD

下载地址:点击下载
更新选项:
Fixed: New Dragon OLPF clips looking incorrect.
Fixed: Motion Mount clips looking incorrect (bug in build 22.2 and 23.0).
Fixed: Dropped frames in a clip could result in nothing being available after the first dropped frame.
Fixed: HDRx blending not working with Rocket-X enabled.
Fixed: Video player not properly updating on pause when Rocket Video Out is enabled.
Fixed: REDline now only shows burn in fonts if they are available on the system.
Fixed: Viewer crop box with locked aspect can no longer be pulled out of aspect.
Added: Video player remembers the last set decode mode across restarts of REDCINE-X PRO.

文章出自finalcolor.net,转载请注明出处,谢谢!

XAVC/XDCAM Plug-in针对final cut pro x 10.1做出更新,redcine-x更新

如果要在final cut pro x上编辑xdcam/XDCAM EX摄像机,还有XAVC的素材,必须安装以下这个插件。在苹果发布fcpx 10.1更新后,今天又收获了sony发布的这款插件的更新。但配置有以下要求,请注意:

xdcam/xavc plugin

1.XAVC/XDCAM Plug-in for Apple 1.2 New Features

  • Support for Final Cut Pro X 10.1
  • Support for Mac OS X 10.9 (Mavericks)
  • XAVC import support (QFHD / 2K)
  • Performance improvements

下载地址:点击此处下载

2.REDCINE-X PROFESSIONAL BUILD 22.1 发布

相关改变

  • Fixed: Crash when exporting with an Intel GPU.
  • Fixed: Frame cropping was always being applied when framing was enabled, resulting in wrong frame guide positions in both the viewer and in exports.
  • Fixed: Fixed a delay in updating the video window while scrubbing the playhead.
  • Fixed: Convergence being applied in the wrong direction when a flip frame option is enabled.
  • Other miscellaneous bug fixes and improvements.

 

文章出自finalcolor.net,转载请注明出处,谢谢!

REDCINE-X PRO BUILD 20.2更新

对于和final cut pro x的交互语言fcpxml更好的整合

20.2

1.主要针对苹果系统10.9的完美整合做出了例如quicktime编码输出的修复。
2.在10.9系统上,第二个显示器的显示问题。
3.Updated: Improved thumbnail text description formatting. Correct labelling for all camera formats.
4.Updated: Added 3D export modes for left eye/right eye only.
5.Updated: FCPX XML now compatible with version 1.3.

文章出自finalcolor.net,转载请注明出处,谢谢。

RED APPLE WORKFLOW V3(重要!),REDCINE-X PRO BUILD 20.1更新

RED APPLE WORKFLOW V3对于fcpx很重要的更新插件,REDCINE-X PRO BUILD 20.1更新
redplugin1
期盼已久的RED APPLE WORKFLOW INSTALLER V3终于更新了,它是redone素材在final cut pro x编辑很重要的一个插件,
基于intle苹果电脑上运行的final cut pro x,fcp7.Red Apple Workflow提供red fcpx plugin,red quicktime解码器,log and transfer for fcp7的插件。让用户直接导入raw的素材片段,用原生的redcode媒体r3d媒体编辑或者转码为prores 编码来进行工作。

这个版本的更新为:
支持RED Dragon摄像机的型号,Motion Mount,和在final cut pro x很好的支持rocket-x加速卡的运算。redcode的自定义面板,Apple Color plug-in的支持,记录和传输的插件更新,还有quicktime编码的更新。
redplugin2
redplugin3

REDCINE-X PRO BUILD 20.1 – OSX BUILD

NOTE: RED Rocket support now requires driver version 1.4.36 and firmware 1.1.17.3 or above.

MANUALS

REDCINE-X PRO and REDLINE manuals are included in the software.
To access manuals, open REDCINE-X PRO and click “Help” in the main menu.
INCLUDED

REDCINE-X PRO
RED PLAYER
REDLINE
CHANGES IN THIS BUILD

NOTE: RED Rocket support now requires driver version 1.4.36 and firmware 1.1.17.3 or above.
NOTE: REDCINE-X Professional for Mac OS now REQUIRES Mac OS X 10.6.8 or higher.
Added: JPEG as an snapshot option.
Added: Ability to select ‘Crop’ as an export preset output resolution option.
Added: Metadata 3D clip burn in options for source clip timecode and name.
Fixed: REDline options -start/-end were not correctly taking precedence.
Fixed: Random crash associated with aborting transcodes.
Fixed: Up/Down arrow keys correctly navigate the browser again.
Fixed: Issue where Dragon footage could not be trimmed.
Fixed: Issue where a single frame trim from an older clip may not display record framerate metadata.
Fixed: Issue with RED ONE footage not playing out through Rocket video out.
Fixed: REDCODE metadata being incorrect for Dragon footage.
Fixed: Issue where faint horizontal lines could be visible in half resolution debayer (software decode only).

文章出自finalcolor.net,转载请注明出处,谢谢。

Resolve Collect协助davinci resolve收集媒体

Resolve Collect

说明:
通过使用davinci resolve的.drp文件,通过resolve collect软件,收集在项目中媒体池和时间线的所有素材到一个单独的目的位置。

当调色师用davinci来调色时,有好多素材来自不同的硬盘。resolve collect就通过它自有的功能把你的所需素材收集到一个快速的raid里方便用户进行调色或者备份素材。

功能特点:

  • 直接载入DRP
  • 可以收集你媒体池,主时间线和其他任何时间线的视频文件(mov,avi,mp4等等)
  • 支持图像序列(DPX,TIFF,Image DNG等等)
  • 对于图像序列,仅拷贝时间线上的图像,以便于节省空间
  • 计算所需空间大小

版本 1.1新特性:
choose Media Pool, Master Session or any Timeline in the project you want to collect
handles spanned R3D files

davinci collect interface

下载地址:
https://itunes.apple.com/us/app/resolve-collect/id668433918?ls=1&mt=12

文章出自finalcolor.net,转载请注明出处,谢谢!

Sam Mestman在Los Angeles Creative Pro用户组讲述FCPX编辑4K RED工作流程

感谢Michael Horton、Dean Cleary和Sam Mestman。

来自Lumaforge的Sam Mestman对观众讲述了在final cut pro x上编辑redone 4K视频素材的工作流程。展示了4K的视频,在final cut pro x上操作性方便,快捷,易管理的工作流程。

如需转载,请注明来自finalcolor.net,谢谢

DaVinci Resolve達文西調光系統精研座談會全紀錄(更新中)

这些视频是台湾hdclub精研视务所的原创视频,对其进行转载,方便学习参考之用,视频中介绍了调色理论和工作流程相关介绍,还涉及到了一些davinci 9的最新界面 finalcolor.net进行了转载

Part 1:

Part 2:

Part 3:

Part 4:

调色软件里的color space色彩空间设置

rec 709

上面所显示的,都是在电子显示设备上,广播和电影制作工业标准的颜色和光重新再建立的设置。

Rec. 601主要针对管理标清分辨率的视频和色域空间颜色

Rec. 709 主要针对管理高清分辨率视频的色域和gamma值

DCI P3是数字电影的标准。

不同的色彩空间设置,对画面的色彩呈现和对肤色的影响都不一样,所以要根据影片逐一考虑。

文章出自finalcolor.net,转载请注明,谢谢!

苹果发布在final cut pro x上剪辑red的工作流程

RED workflows with final cut pro x

大体步骤如下:
1.在redcine-x pro下进行Prores转码
2.在fcpx剪辑
3.通过xml语言与davinci resolve进行交互,当中也涉及到调用源文件,进行调色
4.然后发送回fcpx进行最终的输出。

RED在final cut pro x工作流程文档:
http://images.apple.com/finalcutpro/docs/RED_Workflows_with_Final_Cut_Pro_X.pdf

REDONE数字电影工作流程

1.拍摄
2.通过rocket在REDCine-X中进行离线文件调色
3.有通过h.264 720p和ProRes LT 1920X1080进行转码
4.FCP7进行离线剪辑
5.回批通过cs5.5 to DPX Log
6.VFX
7.Color
8.Render
9.Master